Multi-Function voltage, current calibrator
Model MC140i

Powertek
UK Tel: +44 1788 519911
US Tel: +1 631 913 3242
 Email : info@powertekus.com
Email : info@powertekuk.com

return to homepage | info@powertekuk.com | contact us

MC140i Multifunction voltage and current calibrator
Multifunction calibrator MC140i is ideal for calibration of voltmeters, ammeters, DMMs and panel meters.
bullet

AC/DC voltage 1uV to 1000V
bullet

Current 50uA  to 1000A using test coil
bullet

Deviation control along readout

bullet

0.0035% basic dc accuracy
bullet

0.03% basic ac accuracy
bullet

Supplied with RS232 interfaces
bullet

UKAS/NIST Traceable
The basic function of the MC140i calibrator is accurate generation of calibrated DC/AC voltage in the range from 0µV to 1000V and DC/AC current in the range from 0 to 20A . Using a 50-turn coil the current range can be extended from 50µA to 1000A.  The best accuracy of the calibrator on DC voltage is 0.0035%, on AC voltage 0.03%, on DC current 0.013% and on AC current 0.055%.  Maximum frequency range is from 20Hz to 100kHz for harmonic output waveform.  For calibration of thermometers and temperature regulators, the MC140i simulates the temperature sensor.   The MC140i Calibrator is able to simulate all TC sensors types R, S, B, J, T, E, K and N.  Compensation of the TC cold junction is made by entering a value from the keyboard.


Using the MC140i

MC140i Calibrator is equipped with a number of other functions which make it an attractive and useful instrument.  Among them the possibility to set relative deviations from the actual value of the selected output signal, displaying of the output signal uncertainty, internal calibration procedure and more.  The calibrator's control and indication uses a large area luminescence display on which all necessary information is made available.  The control is performed through simple menus.  Moreover, frequently used functions have firmly assigned keys for direct control.  As standard calibrator is equipped with RS-232 serial port making it possible to be controlled by personal computer.  The MC140i calibrator can be included into Powertek's WinQbase software calibration system.

Links

MC140i Datasheet pdf | MC140i User Manual pdf | MC140i Brochure | MC140i Options/Accessories
 

MC140i Specifications DC/AC voltage

range
% of value
+ % of range
% of value
+ % of range
% of value
+ % of range
% of value
+ % of range
 
DC
20Hz - 10kHz
10kHz - 50kHz
50kHz - 100kHz
0 mV - 20mV **
0.05 + 0.0 + 10µV
0.20 + 0.05 + 20µV
0.20 + 0.10 + 20µV
0.20 + 0.10 + 20µV
20mV - 200mV
0.01 + 0.0 + 10µV
0.1 + 0.03 + 20µV
0.15 + 0.05 + 20µV
0.15 + 0.05 + 20µV
200mV - 2V
0.003 + 0.0008
0.025 + 0.005
0.05 + 0.01
0.05 + 0.01
2V - 20V
0.003 + 0.0005
0.025 + 0.005
0.05 + 0.03
0.05 + 0.03
20V - 240V
0.003 + 0.0005
0.025 + 0.010
--
--
240V - 1000V
0.005 + 0.005
0.03 + 0.02 *
--
--
* valid for f < 1000Hz
** DC voltage from 0µV, AC voltage from 1mV


MC140i Specifications AC/DC current
 

range
% of value
+ % of range
% of value
+ % of range
% of value
+ % of range
% of value
+ % of range
 
DC
 20Hz-1kHz
1kHz - 5kHz
 5kHz-10kHz
1µA - 200µA
0.05 + 0.0 + 20nA
0.15 + 0.0 + 20nA
0.30 + 0.10 +20 nA
--
200µA - 2mA
0.02 + 0.005
0.07 + 0.01
0.20 + 0.05
0.20 + 0.05
2mA - 20mA
0.01 + 0.003
0.05 + 0.005
0.20 + 0.05
0.20 + 0.05
20mA - 200mA
0.01 + 0.003
0.05 + 0.005
0.20 + 0.05
0.20 + 0.05
200mA - 2A
0.015 + 0.005
0.05 + 0.005
--
--
2A - 20A
0.02 + 0.010
0.10 + 0.03
--
--

When option 140-50 Current coil is used, add uncertainty 0.3 % of the set current to the value specified in the above table. Output current is multiplied by factor 25 or 50.



Thermocouple sensor simulation

types
R, S, B, J, T, E, K, N
range of temperature
-250°C - 1820°C
temperature unc.
0.4°C - 4.0°C
temperature scale
ITS 90, IPTS 68


Accessories (included)

Power line cable
1 pc
Operation manual
1 pc
Option 10/11 : Test cable for 1000V - 20 A, black/red
2 pcs



Options

Option 140-50
Current coil with 25 and 50 turns.
 
Suitable for clamp ammeters and split core CTs, testing up to 1000 A. Maximum recommended output current into the coil is 20 Arms.
140-50
Option 10
Test cable 20A/1000V (black)
  
Option 11
Test cable 20A/1000V (red)
  
Option 100
Cable adaptor for distance change between front panel terminals to 3/4 inch
Cable RS-232
RS-232, 2m
  
WinQbase
Application SW for making database of meters and for automatic meter calibration.
  
CALIBER
SW module for automatic calibration of multimeters.