AC and DC non inductive current shunt
Model Option 02F/B shunt

Powertek
UK Tel: +44 1788 519911
US Tel: +1 631 913 3242
Email : info@powertekus.com
Email : info@powertekuk.com

return to homepage | info@powertekuk.com | contact us

 

Option 02F/B non inductive current shunts


 

bullet 0.01A to 50Arms continuous
bullet 100Arms 10 seconds
bullet DC-100 kHz frequency range
bullet Extend current range of DMMs, voltmeters and
wattmeters
bullet Use with phase angle meters
bullet Safety type connections
bullet Insulated construction
bullet Traceable to international standards via NIST and UKAS

About the option 02F/B non-inductive shunt
The option 02F/B is a an non inductive shunt designed to operate over a wide bandwidth, with both AC and DC power systems, especially where phase shift phase angle is a consideration, for power calibration systems.  Very useful for extending the range of Multi-meters and voltmeters.  The option 02F/B can be used with phase angle meters, where phase angle between voltage-voltage, voltage-current or current-current i s required, ideal for phase protection, power meters, wattmeters, energy meters and current transformer calibration

World-wide Traceability
All measurements made using the option 02F/B shunts are traceable to National and International standards; through the measurement standards of Powertek. The option 02F/B shunts are supplied with a certificate of conformance necessary for quality assurance standards such as IEC17025/ISO9001. Independent measurement certification is possible using UKAS, A2LA or Z540/NAVLAP certificate.
 


Non inductive shunt applications

bullet

Calibration laboratories

bullet

Phase meter

bullet

Single phase angle indicators V-A

bullet

Three phase phase angle indicators V-A

bullet

Three phase angle indicators V-A

bullet

Cos Phi indicators

bullet

Power factor meters

bullet

Watt meters

bullet

Multifunction watt transducers

bullet

Phase protection relays

bullet

Power meters

bullet

Energy meters

bullet

Current transformer calibration

bullet

Current probe phase delay

bullet

Transformer phasing

bullet

Synchro

bullet

Resolver Angle indicators




Non-inductive current shunt Option 02F/B, used with DMMs, power meters to extend current measurement ranges.  Use with phase meters to enable phase angle angle measurements between voltage and current



Option 02F/B current shunt specifications

Phase
Accuracy (23º ± 5ºC) 0.1Hz to 99Hz ± 0.02º
100Hz to 999Hz ± 0.04º ± 0.005º/kHz
1kHz to 99kHz ± 0.05º ± 0.005º/kHz
Frequency Range DC to 100 kHz depending on ohmic value
Amplitude accuracy ±0.3% (23ºC ± 5ºC)
Inputs Current ranges and nominal resistance 10mA-2Arms (0R50), 10A (0R02), 20A (0R01) and 50Arms (0R001)
Bandwidth 10mA-2Arms (0R50) DC-100kHz / 10A (0R02) & 20A (0R01) DC-10kHz / 50Arms (0R001) DC-1kHz
Isolation (inputs to ground) n/a
Environment Temperature Operating -20ºC to +70ºC
Storage -40ºC to +85ºC
Humidity (non-condensing) 10% to 90% RH
Dielectric Strength Inputs to case 1.5kV AC 50/60Hz 1 minute
Mechanical Weight 0.2kg
Dimensions (W x H x D) 215mm x 144mm x 390mm

 

Return to homepage