Powertek Logo
UK Office:
US Office:

DP-22kpro 22kV Differential Voltage Probe

The DP-22kpro differential voltage probes are an important accessory for any application involved in power electronics and high voltage systems. These probes allow isolated and floating measurments with any oscilloscope or data recorder, allowing the oscilloscope to remain grounded. Using a DP22kpro Differential probe, differential and floating (isolated) measurements can be made on a variety of ac power systems like 460V/230V/110V ac input power supplies, chopped and switching power supplies, thyristor controllers, variable speed motor drives (PWM signals), motor inrush current and measurement across current shunts. The isolated input is made via two 4mm/banana safety sockets. The BNC output allows easy connection to an oscilloscope or DAQ. The DP isolation probes are powered from a battery or power supply.


DP22kpro Datasheet


DP-22kpro 22kV High Voltage Differential Probe Features
  • Measurement of very High Voltage
  • Measuring Range: 30mVp-p~22kVp-p
  • Bandwidth: DC~120MHz (-3dB)
  • 5 Ranges x30, x100, x300, x1000, x3000
  • Over Range Indication LED
  • Adaptor Input with Auto Regulation System
  • High voltage differential probe
  • Max. Input Voltage:  22kV DC or 40kV p-p or AC 14kV rms
  • Input Impedance 100MΩ/1PF
  • x500 or x5000 Attenuator
  • Max to ground volage: 10kV CATIII
  • Output Impedance 50Ω
  • Used for isolation of oscilloscopes and data loggers
  • Suitable for power electronic systems and electric car power systems
  • Allows isolated floating measurements
  • Prevent ground loops

Differential Voltage DC + AC Peak:
22kV
Bandwidth (50ohm load -3dB):
120MHz (x100, x300, x1000, x3000); 60MHz (x30)
Common Mode Voltage DC + AC peak:
22kV
Common Mode Voltage AC/RMS
7.8kV
Range (Switchable):
5 (x30, x100, x300, x1000, x3000)
Input Impedance (Between Input):
100Mohm and 1pF
Each Input R/C:
50Mohm and 2pF
Common Mode Rejection Ratio (CMRR):
60Hz: >10000:1
100Hz:>1000:1
1MHz: >300:1
Noise (Into 50 ohm Load):
≤1m Vrms
Accuracy:
2%
Output Voltage:
+/-5V
Output Impedance:
50ohm
Maximum Output Voltage:
+/-7V
Input Over Range Indication
Any Range, Input Voltage Exceed the Max. Voltage 90%
Power Auto Regulation System
DC 6-12V
Power Source
External DC 9V/300mA
Accessories
BP-250, BP-276N, BP-286, BP-366, PX-502, ADP-100) or ADP-220)