Power analyzer, Power Analyzer, wattmeter, PA2100 Powertek

The PA2100 is a PC controlled bench top power analyzer, allowing several electrical power measurements to be taken simultaneously during testing - from just one set of input connections. The PA2100's power measurement ability is a must in research and development, manufacturing and required for certification and traceability of manufactured goods. In addition to power measurements, apparent power (VA), harmonics, voltage, current, power factor can all be viewed and stored with ease. The PA2100 wattmeter simply connects between the ac supply and the load, various current transformer options allow measurement with any size of current from 10mA to 10000A. Typical watt meter applications include appliance testing; microwave ovens, electric stoves, heating, air conditioning, TVs, monitors, computers, electronic lighting, fans and motor controllers. Powertek wattmeters are equipped with 4mm/banana safety terminals along with optional "breakout" boxes and clamp current probes for fast and safe measurement.

Click here for PA2100 Datasheet | Click here for PA2100 User Manual

Read about wattmeters (power meters)

    ✓ Measures W, V, A, VA, Power Factor, Frequency, Crest Factor, THD and Harmonics to the 50th harmonic
     ✓ 0.2% basic accuracy unaffected by waveform distortion
     ✓ Accurate at low power factor
     ✓ Fully auto-ranging, isolated measurement inputs
     ✓ Large LED display
     ✓ Captures inrush current
     ✓ Inputs to 1000Vrms (1440Vpk), 20Arms (125Apk) direct and up to 1200A using Option 04
     ✓ Wide input bandwidth; DC and 5Hz to 250kHz
     ✓ Parallel printer output, RS232-USB converter and cable included,
    ✓ LabView Drivers available, GPIB IEEE-488 (option)
     ✓ Supplied with comprehensive PC software connected via USB to PA2100

Power Analyzer PC capability

SPECIFICATION

Measurement Bandwidth	DC, 5Hz to 250kHz

VOLTS Display Resolution	4� digit

Measurement range	0.7Vrms to 1000Vrms (1440Vpk) (200mVrms with blanking disabled)
Max input volts	1000Vrms (1440Vpk) Overload: 3000Vrms for 1 second

Max input CF	20

Accuracy	�0.2% Rdg �0.2% Range �0.02% per kHz �10mV

Common mode V rejection	90dB (1kHz @ 100V with 1kohm Imbalance)

Input Impedance	1Mohm 12pF

CURRENT
Display Resolution	4� digit

Measurement range	0.0144Apk to 125.00Apk 600Arms with Option 03, 1200Arms with Option 04

Max input Amps	20Arms (125Apk) Overload: 500Arms for 1 second

Max input CF	20

Accuracy	�0.2% Rdg �0.2% Range �0.02% per kHz �2mA

Common mode V < 10mA Rejection	(1kHz @ 100V applied to Hi and Lo terminals)

Input Impedance	0.020 ohm

POWER
W	�0.4% Rdg �0.2% range � 2mW �(0.02/PF)% per kHz

W 45-65Hz	�0.2% Rdg �0.1% range
VA	�0.4% Rdg �0.2% range

POWER FACTOR
Range	0.000 to �1.000
Capacitive load	Capacitive load
Inductive load	- = Lagging PF

Accuracy	�0.002 �0.0005/PF per kHz

CREST FACTOR
Range	1 to 20
Accuracy	�0.002

INRUSH CURRENT
Range	0.1Apk to 125Apk
	Up to 1200Apk with Option 04

Accuracy	�1.5%

FREQUENCY
Range	5Hz to 125kHz

Accuracy	�0.1% of reading

HARMONIC ANALYSIS
Range	DC, Fund to 50^th
Fund Accuracy	�0.2% Rdg �0.2% Range
Harm Accuracy	�(0.1 + 0.02 per kHz)%

THD
Range	0.1% to 999.9%, Via display 2% to 999.9%
Accuracy	�0.3% � 0.01% per kHz

GENERAL SPECIFICATIONS
Interfaces	Types	Centronics Printer standard USB / RS232 (included) IEEE-488 GPIB (option 05)
Environment	Operating Temperature	0�C to +50�C
	Storage Temperature	-40�C to +60�C
	Humidity	10% to 90% RH non-condensing
Dielectric Strength	Inputs to case	4kV AC 50/60Hz for 1 minute
Dielectric Strength	AC line input to case	2kV AC 50/60Hz for 1 minute
Power	AC line input voltage	90V to 264V
	AC line input frequency	45Hz to 450Hz
	AC line input fuse	20mm 1AT
	Power consumption	16W/30VA
	Line input and EMC conformance	IEC348 Class 1, IEC-1000-3-2 IEC801 Parts 1 to 4, EN55011, EN61010 Cat 1
Mechanical	Weight	5.5kg
	Dimensions	215mm x 144mm x 390mm

Click here for PA2100 Datasheet | Click here for PA2100 User Manual