The PA2640 is a precision three phase power analyzer, additionally it can be considered as three single phase power analyzers in a single chassis with an easy-to-use user interface. The PA2640 can have up to 4 channels installed, which may be any combination of A/D channel cards and with any combination of available current input options. Multiple PA2640 can be Ethernet connected to make simultaneous multi channel measurements, useful where power analyzer measurements are needed in multiple locations, where close proximity to the load is required.
The UPC Power sensor is used in AC, DC and 3-ph Systems, machine tool control, dc drives, measuring kW, W and Horse Power HP, a necessity when controlling machine tool processes. The UPC HP and power range can be configured by the user, great with distorted waveshapes.
The NEW WT1ph and WT3ph Power Analysing Transducers are used in DC and AC systems where waveshapes are complex, noisy or non-sinusoidal. Measuring kW, kVAr, VA, HP, PF, Vols, Amps, Apk, a necessity with complex loads like UPS, VFD, EV, Converter, Inverter, SMPs and Machine Tool loads. Ranges can be selected by the user allowing accurate and reliable measurement with any waveshape and loads. Its WiFi Bridge allows Mobile devices to connect, set up and acquire data. Optional analog, Ethernet interface