The CWTMiniHF High Frequency current probes utilize a high performance Rogowski Coil sensor thin enough (typical cross section 3.5mm) to fit in confined spaces - often between the legs of a semiconductor power switching device. With high frequency bandwidths up to 30MHz, the CWT Mini HF Rogowski coil is ideal for measuring switching transients or pulsed currents starting at 300mA up to 300kA in power electronic equipment. The CWT Mini HF Rogowski probe is a clip around flexible coil current probe based on the Rogowski principle to achieve high bandwidth measurement and faithful conversion from current to voltage, intended for use with oscilloscopes, data loggers, power meters and power analyzers. Available with a 100mm or 200mm length clip-around coil, ensuring easy current monitoring even where access is limited.
The New CWT Mini HF combines an innovative screened Rogowski coil providing excellent immunity to interference from fast local dV/dt transients or large 50/60Hz voltages and an extended 30MHz (-3dB) high frequency bandwidth for 100mm coils. The coil has a wide operating temperature from -40°C to +125°C and is available with 5kV peak insulation, 4.5mm thickness.
The CWT Mini HF Rogowski coil range from Powertek, combines state of the art performance of the CWT ac current probe but features a miniature clip around Rogowski coil capable of monitoring currents in even the most difficult to reach areas of the circuit.
Full specifications for the CWT Miniature HF Rogowski coil range are available in
Available kA Peak Current ratings 0.03, 0.06, 0.15, 0.3, 0.6, 3.0, 6.0, 12, 30, 60, 120, 300
Sensitivity set to give ± 6 volts peak output (e.g. 1.0mV/A for ± 6000A peak)
Typical Bandwidth 0.1Hz to 30MHz
Accuracy typically 2% of reading
DC offset no greater than 2mV
Thin flexible clip-around coils
Cable length - The cable connecting the cable to the integrator box comes in lengths from 1m, 2.5m or 4m.
Integrator power supply
*1. Higher current ratings are available, CWT300 Peak current 60kA, CWT600 Peak current 120kA, CWT1500 Peak current 300kA etc
*2. Noise max. is the internally generated noise which is at a maximum at LF(-3dB) bandwidth
*3. The High Frequency HF(-3dB) is quoted for a 2.5mm cable between coil and integrator
TYPICAL ACCURACY(full scale)
Calibrated to UKAS ±0.2% with conductor central in the loopVariation with conductor position in the coil loop typically ±2%
±0.05% (full scale)
ABSOLUTE MAXIMUM VALUES OF di / dt (kA/µs)(value must not be exceeded)
All models 1.2kA/uS
Safe peak working voltage to earth. 5kV coils are flash tested at 8kVrms/60Hz for 60 seconds. Information about the continuous use of coils at high voltage can be obtained from Powertek
For de-rating due to temperature cycling please consult Powertek
1m, 2.5m or 4m.Max cable length for CWT015 is 1m, CWT03 is 1.5m, CWT06 is 2.5m
All CWT units are supplied with four AA Lithium batteries (typical life 90 hours) and a 12V-24Vdc input socket and a power adapters (AC to 12Vdc), to power the CWT from 230Vac or 115Vac. Specify adapter type, 230V or 115 V
Rechargeable batteries, option R, are available. (batteries are charged whenever external +12V dc supply is present). Typical recharge time 40 hrs, typical life 8 hrs.
CWT Mini HF 06
i.e. A CWT MiniHF, peak current 120A, Rechargeable battery, 2.5m cable, 100mm circumference coil, 5kV peak coil, 4.5mm thickAll units are supplied with user manual, factory calibration, hard carry case, 0.5m BNC-BNC output cable
If you have any queries regarding the CWT or require specifications outside our standard ranges please do not hesitate to contact us.