Powertek Logo
UK Office:
US Office:

The New CWTUM-S Ultra Miniature High Frequency ac Current Probe

AC current probe for ac current sensing up to 30MHz

The latest Powertek CWTUM-S Ultra Mini Current Probe current probe uses the smallest Rogowski Coil ac current sensor thin enough (typical cross section 1.2mm) to fit between the legs of a SMT, D2PAK and TO220 semiconductors

Read more Get a quote

CWTUM-S Ultra Mini Rogowski-coil ac current sensing probe
Sense coil thickness 1.2mm

The CWTUM-S ULTRA Miniature ac current probes is equipped with a miniature Rogowski Coil current sensor thin enough (1.2mm) to fit between the legs of a SMT, D2PAK or TO220 semiconductor switching device. Measuring currents up to 30MHz, the CWTUM-S ULTRA miniature is ideal for measuring steady state current, switching transients or pulsed currents between 300mA and 30000Apk in power electronic equipment. The CWTUM-S ULTRA miniature probe is a clip around flexible coil current probe, based on the Rogowski principle to achieve high bandwidth measurement and faithful conversion of current to voltage, intended for use with oscilloscopes, transient recorders, data loggers, power meters and power analyzers. All models are supplied with an 80mm length clip-around coil, ensuring easy current monitoring even where access is limited.

  • 1.2mm dia sense coils will fit between the legs of SMT, D2PAK, TO220 package
  • Very thin & flexible clip-around sense coil
  • Peak Current ratings from 30Apk to 30000Apk
  • Sensitivity set to give ±6 volts peak output (e.g. 20.0mV/A for ±300A peak)
  • Capability of driving 50 ohm impedance
  • 30MHz High Frequency Bandwidth
  • Accuracy typically 0.2% of reading
  • Sense coil length of 80mm
  • Peak voltage isolation 1.2kV
CWTUM-S Ultra-Mini ac current probe sense coil and ferrule
CWTUM-S Ultra mini current sense coil and ferrule dimensions
CWTUM-S current sensor fitted betwen legs of SMT or TO-220 Power Device

CWTUM-S Ultramini models and current ranges

CWTUM-S/015/B/1/80 = 200mV/A 30A
order code CWTUM-S/015/B/1/80
CWTUM-S/03/B/1/80 = 100mV/A 60A
order code CWTUM-S/03/B/1/80
CWTUM-S/06/B/1/80 = 50mV/A 120A
order code CWTUM-S/06/B/1/80
CWTUM-S/1/B/1/80 = 20mV/A 300A
order code CWTUM-S/1/B/1/80
CWTUM-S/3/B/1/80 = 10mV/A 600A
order code CWTUM-S/3/B/1/80
CWTUM-S/6/B/1/80 = 5.0mV/A 1200A
order code CWTUM-S/6/B/1/80
CWTUM-S/15/B/1/80 = 2.0mV/A 3000A
order code CWTUM-S/15/B/1/8
CWTUM-S/30/B/1/80 = 1.0mV/A 6000A
order code CWTUM-S/30/B/1/80
CWTUM-S/60/B/1/80 = 1.0mV/A 12000A
order code CWTUM-S/60/B/1/80
CWTUM-S/150/B/1/80 = 1.0mV/A 30000A
order code CWTUM-S/150/B/1/80
Sense Coil is 1.2mm thick, Cable length - The cable connecting the measurement coil to the integrator box is 1m
CWT Ultra-Mini Datasheet | CWT Ultra-Mini User Manual

Selection table for CWTUM-S Ultra mini current probes

CWTUM-S Ultra Mini specifications
Type Sensitivity
(mV/A)		 Peak current
(A)		 Peak di/dt
(kA/uS)		 Noise max*1
mV pk-pk		 Droop
typ.
(%/ ms)		 LF (3dB)
bandwidth
typ. (Hz) fL		 Phase lead at 1kHz
typ. (deg)		 HF (3dB) bandwidth
typ. (MHz) fH*2
Coil Length 80mm
High Sensitivity Ranges of CWT .... measuring currents from 300mA
CWT015 200.0 30 2.0 20 85 150 8.4 30
CWT03 100.0 60 4.0 18 78 100 4.2 30
CWT06 50.0 120 8.0 12 70 75 2.1 30
CWT1 20.0 300 20 10 53 50 0.7 30
CWT3 10.0 600 40 12 11 12 0.7 30
CWT6 10.0 600 80 12 5.5 6.0 0.7 30
CWT15 2.0 3000 100 10 2.8 3.0 0.7 30
CWT30 1.0 6000 100 10 1.5 1.5 0.7 30
CWT60 0.5 12000 100 8.0 1.0 1.0 0.7 30
CWT150 0.2 30000 100 5.0 1.0 1.0 0.7 30

*1Distributed around the fL (3dB) bandwidth.

*2The high frequency bandwidth is in part dependent on coil length. Contact Powertek for values of fH for other coil lengths.

TYPICAL ACCURACY
(full scale)
Calibrated to UKAS ±0.2% with conductor central in the loop
Variation with conductor position in the coil loop typically ±2%
TYPICAL LINEARITY
±0.05% (full scale)
di/dt ratings: Abs max values of di/dt (kA/µs)

PEAK 100kA/uS All models
Abs maximum rms values of di/dt (kA/µs) (value must not be exceeded)

1.0kA/uS All models
Coil and cable
COIL CIRCUMFERENCE ‘A’ (mm)
80mm
COIL CROSS SECTION ‘B’ (mm)
1.2mm
PEAK COIL VOLTAGE ISOLATION (kV)
1200V rating established by a 3kVrms, 50Hz, 60sec flash test

Safe peak working voltage to earth. Coils are flash tested at 3kV/60Hz for 60 seconds. Information about the continuous use of coils at high voltage can be obtained from Powertek

TEMPERATURE RANGE (℃)
-40℃ to +125 ℃ (coil)

For de-rating due to temperature cycling please consult Powertek

CABLE LENGTH (metre) (from box to coil)
1m
CWTUM-S ac current probe sense coil dimensions
Ordering
Model / sensitivity:
CWTUM-S Ultra mini unit is supplied with bnc-bnc cable, 12-24Vdc input, 4 AA batteries, power adapter, user manual, calibration certificate and carry case.		 Model Range Denotes battery Cable Length (m) Coil circumference (mm)
CWTUM-S 015 B 1 80

All CWTUM-S Ultra Mini current probes are supplied with hard carry case, bnc-bnc cable, batteries, power adapter, user manual, statement of conformance & calibration certificate

If you have any queries regarding the CWTUM-S Ultra Mini or require specifications outside our standard ranges please do not hesitate to contact us.

CWTUM-S Ultra-Mini Datasheet | CWTUM-S Ultra-Mini User Manual
Powertek specializes in the design and manufacture of electrical power, voltage and current measuring instrumentation
Contact Powertek today