PTK-UEC6C-X 5A (6A) three phase 3 or 4 wire programmable energy meter

General features

4 DIN modules energy meter for the energy measurement in industrial and civilian application, available with MID certification suitable for billing. Combined with different external modules, the meter can communicate with other systems. COM modules are available for the most common field protocols.

Besides the energy, the meter can measure the main electrical parameters and makes them available on the IR port. The LCD display shows the energies and the instantaneous powers.

The meter is built according to EN 50470-1 standard. The active energy is compliant to IEC 62053-22 class 0.5 S, but for MID certified device it fulfills class C requirements according to EN 50470-3. The accuracy of reactive energy is compliant to IEC/EN 62053-23 class 2.

Wide backlighted LCD display with clear graphic symbols comprehensible at a glance. Metrological LED on front panel and sealable terminal covers. Available versions with different voltage working range for the connection on 3 or 4 wire network, suitable for balanced or unbalanced loads. The analysis of the MTBF values, the accurate selection of components and the reduction of the internal working temperatures together with strict production and control standards guarantee a product with an excellent quality and a long lasting reliability.

Applications

• Totalization of electric energy by 3ph feeder, phase or machine
• Measurement of energy generated by renewable sources such as solar, PV array and wind turbine
• Billing of consumption in Shopping Malls, Residential areas, Marine and Naval ports
• Totalization of the electric consumption in Hotels, Exhibition centers, Concerts and Fairs
• Accounting of consumptions in buildings with executive office services
• Internal allocation of the consumptions in timeshare civilian and industrial buildings
• Realization of audit and energy management systems
• Remote survey of the consumptions and computation of costs

Benefits

• Up to 30 instantaneous measurements, complete set of energy counters with 2 tariffs total and partial counters. Moreover partial counters can be started, stopped or reset.
• Suitable for CT with 1 or 5A secondary. CT ratio is programmable (1 ... 10000)
• Phase sequence and diagnostic function for error signalling in case of wrong polarity connection
• Available MID according to Swiss market (MID S). Reactive energy is not shown on energy meter display

Power supply

• Power supplied from the voltage circuit
• Nominal measurement voltage ±20%
• Max consumption (for each phase): 7.5 VA - 0.5 W
• CT burden (for each phase): 0.04 VA
• Nominal frequency: 50/60 Hz

Voltage range & frequency

• 3x230/400 V 50 Hz (MID)
• 3x230/400 ... 3x240/415 V 50/60 Hz (NO MID)

Current

• Starting current Ist: 1 mA
• Minimum current Imin: 10 mA
• Transitional current Itr: 50 mA
• Reference current Iref (In): 1 A
• Maximum current Imax: 6A

Accuracy

• Active energy class C according to EN 50470-3 (MID)
• Active energy class 0,5 S according to IEC 62053-22 (NO MID)
• Reactive energy class 2 according to IEC/EN 62053-23

50 outputs

• 2 passive optoisolated
• Maximum values: 250 VAC-DC - 100 mA
• Meter constant according to the set CT ratio:
  • 1000 imp/kWh with CT ratio in range 1...4
  • 200 imp/kWh with CT ratio in range 5...24
  • 40 imp/kWh with CT ratio in range 25...124
  • 8 imp/kWh with CT ratio in range 125...624
  • 1 imp/kWh with CT ratio in range 625...3124
  • 0.1 imp/kWh with CT ratio in range 3125...10000
    The measuring unit (imp/kWh, imp/kvarh, imp/kVAh) changes according to the assigned counter (kWh, kvarh, kVAh)
• Pulse length: 50 ±2ms

Tariff input

• Active optoisolated
• Voltage range for tariff 2: 80 ... 276 VAC-DC

Metrological LED

• Meter constant: 10000 imp/kWh
• Pulse length: 10 ±2ms

Environmental conditions

• Operating temperature: -25°C ... +55°C
• Storage temperature: -25°C ... +75°C
• Humidity: 80% max without condensation
• Protection degree: IP51 frontal part -IP20 terminals

Data Sheet

Download Datasheet